STF Double Sided Arch Top Fence Panel – Bespoke

(1 customer review)

£70.00

    Free UK Mainland Delivery
     Pressure Treated Timber
     Wind Resistant Design
     Bespoke Size  (Max 6ft)

 

Description


These STF Double Sided Bespoke Arch Top Fence Panels are handmade to order and created when a standard size just wont fit.

Double Sided panels are our most popular design as they are wind resistant. With the UK weather as unpredictable as it is, this style allows any wind to flow between the boards (rather than against).

They are also the perfect choice for fitting between neighbours because both sides look the same.

The maximum width we can make these panels to is 6ft and the maximum height is approx.. 6ft to the top of the arch.

To order a Double Sided bespoke size, simply add the item to your basket. Then in the comments box at the end of your order please state the exact measurements required (w x h). We will manufacture these panels with the given height to the top of the arch, with the shoulder height approx.. 6″ lower unless you state otherwise.

 

*Please note – this product comes in a natural timber finish and is not painted. Any images shown in different colours have been painted by customers and are for illustration purposes only.

FEATURES


  • Wind Resistant Design – allows air to flow between boards.
  • Double Sided – panels look the same on both sides.
  • 125mm Boards – offering better privacy than most of our competitors who use 100mm boards.
  • Pressure Treated Timber – protecting the wood from rot and insect infestation.
  • Heavy Duty – strong and robust these panels are made to last.
  • Can fit into concrete posts with a recess of 50mm.
  • Can be attached to wooden posts.
  • Matching Gates available.
  • Attractive Arch Top Design.
  • Bespoke Size – to fit any gap up to 6ft.

INSTALLATION


All panels and gates in our STF Range are very heavy and we recommend a minimum of 2 people for handling.

The Bespoke Double Sided Arch Top Fence Panels can fit into concrete posts with a recess of 50mm or attached to wooden posts. In any case timber panels should be kept off the ground to prevent moisture absorption, and to keep the wood protected against rot and insect infestation (if these panels are installed with direct contact of the ground the guarantee against rot and insect infestation will be compromised). We advise that concrete gravel boards are used beneath the panels, or that they are raised at least 1″ above the ground.

If using wooden posts we would suggest using 4″x4″ posts and 80mm screws. Ensuring a secure fit, screws should be placed through each end of the back rails.

We do not sell posts or gravel boards due to weight restrictions on our vehicles, however these can be purchased separately from most local builders merchants.

MEASUREMENTS


  • Depth of panels at each end – 47mm
  • Depth of panels in the middle – 59mm
  • Width – Bespoke (up to 6ft/1829mm)
  • Height to the top of the arch – Bespoke (up to approx.. 6ft/1800mm)
  • Shoulder Height – Bespoke (usually 6″ lower than the top of the arch)
  • Each Single Board – 12mm deep x 125mm wide
  • Gap between each board – approx.. 63mm
  • Each Back Rail – 47mm deep x 35mm wide
  • The amount of back rails used on each panel depends on the height:
    2ft = 2 rails / 3ft & 4ft = 3 rails / 5ft & 6ft = 4 rails.

All measurements are approximate as wood can expand and contract dependant on weather conditions.

As we manufacture these panels to your specific size we are unable to accept any returns of bespoke made products, so please double check your sizes before placing an order.

MAINTENANCE


Due to our timber being pressure treated, no maintenance is required.

Should you wish to prolong the appearance of your wood (as it will turn a silver / grey colour overtime) we have a great range of wood paint on our website which you can view by Clicking Here.

There are also various treatments available in most DIY / hardware stores.

DELIVERY


This item is eligible for free UK mainland delivery. If you live outside of this area, please Contact Us with your full address and item requirements for a free quote.

Deliveries are usually dispatched within 20 working days from the date of your order. This however cannot be guaranteed during the busy seasons.

Once your order has been processed you will receive more details (usually via email) about your delivery including the date your items will be with you and who will be delivering the goods.

Due to our carriers insurance, delivery can only be made to kerbside. For delivery T & C’s please Click Here.

 

Additional information

Gate / Fence Style

Vertical Boards, Arch Top

Gate / Fence Type

Fence Panel

Gate / Fence Size

Bespoke Size

1 review for STF Double Sided Arch Top Fence Panel – Bespoke

  1. Joanne

    Bespoke was exact correct size

Add a review

You may also like…