STF Bespoke Double Sided Flat Top Fence Panels are handmade to order and created when a standard size just wont fit.
These panels are our most popular design as they are wind resistant. With the UK weather as unpredictable as it is, this style allows any wind to flow between the boards (rather than against).
They are also the perfect choice for fitting between neighbours because both sides look the same.
The maximum width and height that we can make these Bespoke Double Sided Panels to is approx.. 6ft (1810mm).
To order a bespoke size, simply add the item to your basket. Then in the comments box at the end of your order please state the exact measurements required (w x h).
As we manufacture these panels to your specific size we are unable to accept any returns of bespoke made products, so please double check your sizes before placing an order.
- Wind Resistant Design – allows air to flow between boards.
- Double Sided – panels look the same on both sides.
- 125mm Boards – offering better privacy than most of our competitors who use 100mm boards.
- Pressure Treated Timber – protecting the wood from rot and insect infestation.
- Heavy Duty – strong and robust these panels are made to last.
- Can fit into concrete posts with a recess of 50mm.
- Can be attached to wooden posts.
- Matching Gates available.
- Bespoke Size – made to fit any gap up to 6ft.
All panels and gates in our STF Range are very heavy and we recommend a minimum of 2 people for handling.
The Bespoke Double Sided Fence Panels can fit into concrete posts with a recess of 50mm or attached to wooden posts. In any case timber panels should be kept off the ground to prevent moisture absorption, and to keep the wood protected against rot and insect infestation (if these panels are installed with direct contact of the ground the guarantee against rot and insect infestation will be compromised). We advise that concrete gravel boards are used beneath the panels, or that they are raised at least 1″ above the ground.
If using wooden posts we would suggest using 4″x4″ posts and 80mm screws. Ensuring a secure fit, screws should be placed through each end of the back rails.
We do not sell posts or gravel boards due to weight restrictions on our vehicles, however these can be purchased separately from most local builders merchants.
- Depth of panels at each end – 47mm
- Depth of panels in the middle – 59mm
- Width – Bespoke (up to 6ft/1829mm)
- Height – Bespoke (up to approx.. 6ft/1810mm)
- Each Single Board – 12mm deep x 125mm wide
- Gap between each board – approx.. 63mm
- Each Back Rail – 47mm deep x 35mm wide
- The amount of back rails used on each panel depends on the height:
2ft = 2 rails / 3ft & 4ft = 3 rails / 5ft & 6ft = 4 rails.
All measurements are approximate as wood can expand and contract dependant on weather conditions.
Due to our timber being pressure treated, no maintenance is required to protect the wood from rot.
Should you wish to prolong the appearance of your wood (as it will turn a silver / grey colour overtime) we have a great range of wood paint on our website which you can view by Clicking Here.
There are also various treatments available in most DIY / hardware stores.
This item is eligible for free UK mainland delivery. If you live outside of this area, please Contact Us with your full address and item requirements for a free quote.
Deliveries are usually dispatched within 20 working days from the date of your order. This however cannot be guaranteed during the busy seasons.
Once your order has been processed you will receive more details (usually via email) about your delivery including the date your items will be with you and who will be delivering the goods.
Due to our carriers insurance, delivery can only be made to kerbside. For delivery T & C’s please Click Here.